Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It's discreet, doesn't use keys or LEDs and is hidden within the vehicle's wiring.
It also allows users to disable the system temporarily by using Transport Mode in the event of renting out their vehicle. This guide will walk you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle against hacking, key cloning and relay attacks. The system is directly connected to your vehicle's ECU and is protected by a unique pin code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled through circuit cuts.
The system is simple to use, however it's important to have an expert installation to ensure a secure and secure connection with your vehicle's ECU. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete the protection package for your vehicle.
The first step is to disconnect the battery to prevent accidental airbag deployment or short circuits. Once this is done the installer is now able to begin work. Hand tools are essential for securing connections with precision, while a multimeter can be used to verify electrical values and safety. Insulation tape and cable ties are also essential for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's manual will provide specific guidelines specifically tailored to your specific model.
During the installation process, it's essential to choose an area for grounding that is free of paint and debris. The installer must be sure that the immobiliser's H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. Depending on the model, these wires might need to be soldered or plugged in. A top-quality connector is recommended to ensure a long-lasting and reliable connection.
After the installation is completed, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. To do this, the customer has to press the service button on the dashboard five times in the space of two seconds. After that the system will verify with 5 indication signals.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for those who rent their vehicles often through platforms like Turo. Having an immobiliser can also lower insurance costs, as it significantly decreases the risk of theft.
Getting Started
If you're looking for a solution to secure your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device protects your vehicle from starting even if a criminal steals or copies the key. This is due to its high-tech technology, which is designed to stop the car's engine from starting until the correct PIN code is entered.
ghost immobiliser review is connected to the vehicle's bus network CAN which allows direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence, which only you know. This makes it impossible for anyone else to start your vehicle. This is the most secure security system that will safeguard your most precious possessions and preserve its value should you decide to sell it in the future.
Installing a ghost immobiliser can be a simple process, but it's important to follow the instructions carefully to avoid problems with the electrical system and malfunctions. First, you need to find and locate a permanent 12V power source and an appropriate grounding point on the chassis of your vehicle. Then, you can begin connecting the wires that will be used to activate the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a secure connection. Connect the connections with heat shrink tubing, insulation tape or other materials to avoid short circuits of electricity.
After the wires are connected, you are able to connect the battery and start the engine to determine whether the immobiliser is functioning. After you've verified that everything is working properly and you are satisfied, you can place the immobiliser in a secure place inside the vehicle. Make sure you hide it properly to stop a thief from tampering with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it complies with the highest standards of security and is a great protection against car thieves. It provides superior protection against key cloning, hacking and relay attacks. It can't be disabled without knowing the code. It is also simple to use and can be set into an auto valet mode so that your car is not activated when you bring it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to stop theft of vehicles. It is directly connected to the vehicle's CAN bus and communicates with the ECU which makes it a virtually undetectable addition to your car. Ghost Immobiliser doesn't interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanning devices. This is because the system doesn't transmit and receive radio frequency signals, and it utilizes CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition in your car and enter your sequence for disarming (either one or two buttons). The indicator will flash two times to verify that you have entered the correct code. You are now able to start your vehicle and drive safely.
Once installed The Ghost Immobiliser can protect your car from hacking and key cloning and will also protect the value of your most prized possession. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you need to give your car to service or valet parking.
To complete the Ghost Immobiliser installation, you'll have to locate a source of constant power (12V) and an earthing point. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested for bundling and securing the wires. This will reduce the risk of theft by thieves. To avoid committing mistakes, double-check these points and mark them using a label or tape. Verify all connections for signs they're wearing out. Make sure that all connections are securely in place, and are properly sealed. Don't forget to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit functions properly and that all connections and insulation are secure. Be sure to correct any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU to stop the motor from starting without authorization. Its cutting-edge technology protects your vehicle against key cloning and hacking as well as other methods employed by thieves to steal vehicles. The Ghost also works in conjunction with other alarm and tracking systems to provide the most complete protection for your vehicle. This system's unmatched features and secluded design make it a popular option for car enthusiasts and security-conscious motorists alike.
To ensure the proper integration of the Ghost Immobiliser, it's important to follow the steps of the installation procedure. The best place to start is to consult the wiring diagram for your vehicle, which will serve as a guideline to locate and connecting the wires required. The next step is to identify the power source and grounding points. Once you have located them, you'll be required to mark the points to make them easily identifiable when installing. In addition, it is essential to use high-quality tools and materials. Basic hand tools can help in making connections that are precise while a multimeter can verify electrical values and ensure security. Insulation tape and cable ties will keep the connections tidy and neat. A Ghost-specific user's manual is also available.
It is important to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This step will confirm that the immobiliser works according to plan, and prevents unauthorised vehicle start-ups. It is recommended that you perform this procedure regularly as part of your routine vehicle inspections to ensure that the system is always functioning properly.
Once the installation is complete After the installation is completed, you are able to drive your car with confidence. The Ghost will keep your pride and joy secure from thieves who might steal it and ensure that nobody is able to drive off with your vehicle without the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts at theft or tampering. This allows you to locate your car if it's stolen.
The Ghost can be used in a variety of vehicles and is compatible with all major manufacturers. If how you can help interested in securing your car with this cutting-edge device, call Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA registered installer, a certificate that assures us that we follow strict guidelines in the installation of our products. This reassures customers, insurers and law enforcement officials that all installations are performed safely and in a correct manner.